SPL-1XL SIP PRODUCTION LINE
ONE-COMPONENT MOISTURE CURING PU APPLYING TECHNOLOGY
Jumbo sandwich panel (SIP) production line with motorized belt conveyor and P-type pneumatic press
SPL-1 XL SIPs manufacturing line was designed for production of Jumbo SIPs with dimensions up to 3000x13000 mm. The line can be used for refrigerated truck body panels manufacturing. The line may be equipped with one-component PUR or two-component PUR applicators.
Gluestream SPL-1 XL consists of:
- PUR adhesive applying portal SPL-10S of stationary type;
- Automated movable carriage;
- Pneumatic press of portal type;
- Pump station.
Glue applying portal SPL-10S with one-component PUR adhesive applicator, which is equipped with an electric drive motor to lift up and down, depending on the height of the stack of the materials, placed on the carriage. Adhesive applicator is equipped with an automatic nozzle shutter tray, which is filled with a plasticizer, in order to prevent reaction PUR adhesive inside of the nozzles.
P-type stationary pneumatic presses is completed with a movable carriage, where the stack of the panels is assembled.
According to the high accuracy of the positioning and automatic control, it is possible to eliminate the loss of the adhesive.
The adhesive is fed by a high precision dosing pump, applying the presicely determined amount of the adhesive (±5g/m2), leveling difference of the adhesive viscosity, allowing to use one-component polyurethane adhesives of any manufacturers without reconfiguring the hardware.
All Gluestream machinery is equipped with a remote access module, providing the customer with 24/7 online internet support.
Please, contact us if you need to get our technical support and we will share our knowledge with you. Our team has a great experience in adhesive technology, gained over the years.